How Do I Setup My MSRM WiFi Extender ?

The MSRM WiFi extender setup is an easy task and lets you configure your extender with your existing wireless router. The main responsibility of your extender is to increase the range of your existing wireless network. Once you go about the MSRM US754 WiFi extender setup, you are required to connect your device to the router’s network. For that, you need to use your router’s WiFi credentials

If you want to learn how do I setup my MSRM WiFi extender, you need to read this post till the end. You will learn everything about the MSRM extender setup. So let’s start with the configuration of your new WiFi range extender.

How to Prepare for MSRM WiFi Extender Setup

To be all set up for the MSRM US754 WiFi extender setup and installation, there are certain steps that you need to follow. To get help with the preparation, please follow the steps below:

Place the MSRM extender nearby the WiFi router
A computer or laptop is required for the configuration
Make sure you know the WiFi credentials
Your device should have an up-to-date web browser

Methods For MSRM Extender Setup

We have put down the step-by-step instructions to help you learn how to go about the MSRM US754 WiFi extender setup using two different methods. Kindly follow the steps accordingly:

Method 1: MSRM Setup Through Web Interface

The first method is all about the web interface setup. This method will guide you to access your MSRM extender’s web interface to configure its settings. Follow the steps below:

Firstly, power On the MSRM range extender while keeping it next to your existing router.
After that, power On your computer and connect it to the extender’s network.
Use a wired or wireless connection. Make sure you verify the connection.
Next, launch a web browser (Google Chrome) and add the IP address to it.
Put down 192.168.10.1 in the address bar to visit the login page.
Fill in the MSRM username and password to access the MSRM extender setup.

Let your device search for all the active networks around.
Locate your home network and select it. Enter the WiFi password to connect.
After that, configure the WiFi settings of the extender.
At last, the MSRM US754 WiFi extender setup will be completed successfully.

Method 2: MSRM WiFi Extender Setup Via WPS

It is the easiest way to set up your extender. So if you want to learn how do I setup my MSRM WiFi extender in the easiest possible way, please follow this method.

Make sure the extender is plugged into a wall outlet nearby the router.
The router must also be powered On.
Make sure your router supports the WPS method to set up any wireless device.
Most likely, you will see the WPS button on the backside of the router.
Next, press the WPS button on your MSRM extender.
Wait for a few seconds and press the WPS button on your router.

Make sure the WPS button is pressed on both devices within 2 minutes.
At last, the MSRM US754 WiFi extender setup will take a few minutes to complete.

NOTE: Although it is the easiest method to set up your extender, you won’t be able to configure your extender’s settings as per the requirement. The web interface method holds an edge over this method in this regard.

Conclusion

This post was all about the MSRM WiFi extender setup and installation. Setting up the MSRM wireless range extender is pretty easy and takes a few minutes. Although both methods, discussed in this post, are easy, we suggest that you always opt for the web interface method. The web interface method lets you configure other functionalities and features of your extender apart from the initial configuration.

We hope this MSRM extender setup guide was helpful to you and that you liked it. If you come across any issues whilst in the middle of the MSRM US754 WiFi extender setup, feel free to talk to our support team for more help.

FAQs

How to Setup MSRM WiFi Extender?

You can set up your extender either using the web interface or through the WPS method. If you want to set up your device using the web interface, use the default IP address 192.168.10.1. Make sure you remember the WiFi credentials of your router’s network.

Can’t Setup MSRM Extender. What to do?

If you encounter any problems while attempting to go through the initial setup, please abort the whole process and reboot your device. If the issue persists, locate the reset button on the backside of the device. Press and hold the reset button for 10 seconds and wait. After that, you can again start with the initial setup of your device.

How to Login to MSRM Extender?

You can login to your extender using a web browser on a connected device. Launch a web browser and type the default IP address in the address bar. Press Enter and you will reach the login page. Put down the username and password of your device to get inside it.