How to Setup Macard WiFi Extender ?
The Macard WiFi range extender is another renowned extender known for its flawless range. When you face low signal strengths and poor network coverage, this extender is the solution for you. You can eliminate all dead zones and experience an impeccable network all over the house. You just need to know the procedure for the Macard WiFi extender and you’re good to go. After a proper setup, you can ensure the proper functioning and top-quality internet connection. Thus, you must know the correct procedure for the extender.
If you want to know the process for the Macard WiFi extender setup, we’ve got you. We are here with this post to help users with the setup. In this blog, we will talk about the complete procedure for the setup. So, keep reading ahead to find out thorough instructions for the setup.
Requirements For the Macard WiFi Extender Setup
To set up the Macard extender there are some things you require. When you have all the necessary things you can set up the extender correctly. The requirements for the setup are as follows:
- A setup router
- The default IP address
- An Ethernet cable
- A web browser
- Your smartphone or PC
These are some things you must have for the setup. Further, we will go over the steps for the setup.
Steps For the Macard WiFi Extender Setup
You can set up the extender easily with the help of these things. For the setup, you just need to log into the extender’s user interface and configure the settings. To log into the web interface, you can use the IP address. Afterward, you can set up the extender correctly. The instructions for the procedure are as follows:
Macard Extender Setup Through Web Interface
- To begin with, keep the extender and router in the same room and power them on.
- Now, you need to activate the WiFi extender by pressing and holding the reset button.
- You can release the reset button after 15 seconds and the extender will reboot.
- From your smartphone, turn on Airplane mode and connect to the extender.
- To connect your PC to the extender’s network, you will require an Ethernet cable.
- Hereon, open a web browser of your choice and enter the IP address in the address bar.
- You can also scan the QR code on the extender to access the extender’s login page.
- From the login page, select the language, and click Login to log into the user interface.
- The extender will scan for all the available networks around the extender.
- After that, you can select your WiFi network and enter the correct password.
- Give the extender some time to form a connection successfully with the router.
- Now, you can configure the settings of the extender accordingly.
- At last, relocate the extender near the dead zones and connect your devices to it.
These are the methods you can use for the Macard WiFi extender setup. Once the setup is complete, you can place the extender near the dead zone. Just ensure to keep the extender inside the router’s range. Otherwise, the connection will break and it will not work. If there are any issues you are having with your Macard extender , you can get in touch with our expert team right now.
