How to Setup your Hyzom WiFi Repeater?

The Hyzom WiFi range extender is one of the most remarkable WiFi repeaters. Unlike some extenders, the Hyzom extender’s WiFi signal can actually pass through walls and cemented floors. Therefore, extending the WiFi signal to each and every room, no matter the distance. In order to make the most out of your extender, you need to execute the Hyzom range extender setup.

If you want to know the complete process for the setup, keep reading ahead! Further, we’ll thoroughly discuss the Hyzom extender WiFi setup.

Requirements for the Hyzom WiFi Extender Setup?

A host router.
The IP address of the extender.
The username and password of the extender.
An ethernet cable.

Connect with Hyzom Extender WiFi Repeater

There are two ways to set up your extender, one is the Hyzom WiFi range extender manual. The other is via the WPS button. With the WPS button, you can set up your extender within a few minutes. However, afterward, you will have to configure the extender from the setup page only. Find out more about these methods below:

Hyzom WiFi Range Extender Manual Setup

Firstly, you need to connect your device to the extender’s network.
On the device, open a web browser and enter the IP address of the extender in the address bar.
After that, the login page will appear. You need to enter the username and password of the extender.
Now, the setup page will display.
Thereafter, you can select a name for the 2.4GHz and the 5GHz bands along with the password.
Now, from the settings, you can connect the extender to the router’s network by entering the password of the router’s network.
This is the procedure for the Hyzom WiFi range extender manual setup.
Finally, you can relocate the extender to near the dead zone.

Hyzom Extender WiFi Setup via the WPS

Primarily, locate the WPS button on the extender and the router.
Ensure that the router and the extender are in the same room.
Now, press the WPS button on the router.
Subsequently, press the WPS button on the extender within two minutes.
Wait for the extender and the router to establish a connection.

This is the procedure for the Hyzom range extender setup. When the setup is complete, you can configure the settings accordingly. Afterward, you can relocate the extender wherever you want. Just keep it in the router’s range for a seamless connection.

Troubleshooting Hyzom WiFi Range Extender

There could be several reasons for the Hyzom extender not working accurately. It doesn’t mean there’s any wrong with your extender, many times it’s a problem from our end only. There are various troubleshooting methods you can try to fix the issue. These issues along with their troubleshooting methods are as follows:

Network Connectivity Issues

If you are not able to receive a network connection in all the rooms then you need to check the location of the extender.
Whether the extender is able to receive the router’s network or not. If the extender is too far from the router, the connection will break.
If the extender is too close to the router, then maybe not all the rooms will receive the router’s network.
You need to place it halfway between the router and the dead zone’s pathway.

Inaccurate Settings

You need to check the settings of your router and the extender.
The settings of the extender and the router’s settings should match.
If they are not, you could be facing issues because of it.

External Interruptions

Check that there aren’t any interferences in the router’s and the extender’s path.
Devices such as radios, microwaves, cordless phones, and various other devices can cause interruptions in the network.
Place the extender and the router, where there will be no devices interrupting their networks.

Firmware Incompatibility

If the firmware of the extender is outdated, you will have trouble connecting it to the extender.
This is the same for the router. You need to update the firmware of both devices for a flawless internet connection.
You need to update the firmware of both devices, as it will eliminate the issues of the extender.
Not only that, the upgrade might even bring new features to the extender.

Reset the Extender

If none of these methods are working, then you need to reset the extender.
To begin with, locate the reset button on the extender.
You can find the reset button on the back or the side panel of the extender.
Now, you need to press the button using a pin or something similar.
At last, after 10 seconds you can release the button.
When the reset is complete, you will have to execute the Hyzom extender wifi setup again.

These are some troubleshooting methods you can use to fix the issues with the extender. Moreover, these issues can be avoided if you proceed with the Hyzom range extender setup accurately. If there’s any other issue you are facing, reach out to our team right now!