How to Reset Ecovacs Deebot N79S?
If you have been wondering how to reset Deebot N79, you can do so easily. The reset is an effective troubleshooting method, you just need to find the Deebot N79S reset button, and you’re good to go. Resetting Deebot fixes any issues within the Deebot.
However, the reset Deebot N79 should be your last resort as the reset brings back all the factory default settings. The reset process will remove any customizations and changes made by you, so you will have to reconfigure the Deebot after the reset.
For those moments, it’s imperative to know how to reset Deebot N79 without remote. But you don’t have to worry, as in this post, we’ll talk about the reset procedure through the Deebot N79S reset button.
Steps to Reset Deebot N79
There are several types of reset you can execute. You can hard reset Deebot N79, force reset, and reset it through the remote. The hard reset is through the Deebot N79W reset button, whereas the soft reset is via the Deebot N79S remote control. The steps for both methods are as follows:
How to Reset Deebot N79 Without Remote?
- Firstly, power On the Deebot by switching the power switch to the 1st position.
- Secondly, locate the Deebot N79 reset button.
- If you have been wondering where is the reset button on Deebot N79, it is next to the right hinge, inside the top cover.
- Now, press the Deebot N79 reset button, using a sharp object.
- After 3 seconds, you can release the Deebot reset button.
- Hereon, you will hear a sound, and the LED will start blinking.
- Finally, close any covers, and give the Deebot some time to reboot.
Reset Deebot N79 Through the Remote
- Initially, press the start/pause button on the remote.
- Now, hold the button for 3 seconds.
- After 3 seconds, you will hear a short sound, indicating the reset has begun.
- At last, give the Deebot some time to come back to life, and then reconfigure it.
Force Deebot N79 Battery Reset
- To begin with, power Off the Deebot.
- Now, flip the Ecovac over, and find the battery cover.
- Hereon, detach the cover, and withdraw the battery.
- After a minute, you can insert the battery again.
- Now, you can power On the vacuum.
We hope you were able to understand how to reset Deebot vacuum. Now, you can reconfigure the Ecovac Deebot. Resetting Deebot through the first two methods will restore the factory default settings of the Ecovac. You can reset the vacuum to troubleshoot the Deebot won’t turn on, along with several other issues.
FAQs:
Where is the reset button on Deebot N79?
The Deebot S79S reset button is under the top cover of the vacuum, by the right hinge. You can use the Deebot N79 reset button to restore the factory default settings of the vacuum and eliminate any issues within the vacuum.
Why won't my Deebot N79 connect to WiFi?
To connect your Deebot N79 to the WiFi, ensure the router and your mobile is within 5ft of the vacuum. The closer these devices are to the vacuum, the better signal the vacuum will receive. Additionally, you must ensure to connect your mobile to the router as well.
Does Deebot n79 have an app?
Yes, Deebot N79 has the Ecovacs app. You just need to install the app, add your device, and configure the device appropriately. After that, you can manage your vacuum from anywhere and anytime with the app.
How do I reconnect my Ecovacs to Wi-Fi?
When the app is inside the router’s range, it will automatically detect the router’s network. Afterward, you can enter the password, and establish a connection. However, if it doesn’t you can manually connect it.
We discussed how to reset Deebot vacuum, in this blog. If there are any other troubles you are facing with your Deebot vacuum, you can contact our team right now for an effective solution! We’ll assist you with resolving the issue properly.
