How to Perform iLife Robot Vacuum Troubleshooting Steps?

The iLife Robot vacuum is among the best vacuums that offer several modes to users. Moreover, it has a built-in mop that can be very convenient for users. It integrates the Lidar technology, which helps the robot vacuum maneuver its way around much more simply. However, due to several factors, you could face the iLife Robot Vacuum Troubleshooting issue. But it’s nothing to worry about, as this issue is common among users, which makes it easy to troubleshoot.

If you are facing the same issue with your iLife robot vacuum as well, don’t worry. Today, we’ll discuss some iLife vacuum troubleshooting methods to help you fix the problems effectively. Furthermore, we’ll also discuss some issues you could face with your robot vacuum.

Common Issues of iLife Robot Vacuum

Some common issues you could face with your iLife robot vacuum are as follows:

iLife vacuum won’t run correctly
The vacuum suction not working properly
The robot does not accept commands
iLife robot vacuum beeping while charging
Brushes not spinning
iLife robot vacuum flashing blue light
The vacuum is creating noise
Side brushes are not rotating
Showing error codes
Vacuum is overheating

These are some problems you could face with your robot vacuum.

iLifi Vacuum Troubleshooting Steps

If you are facing any of the above issues, don’t worry. In this section, you can find the iLife robot vacuum troubleshooting methods. These methods are as follows:

Fixing ILife Vacuum Won’t Run Correctly

There could be several reasons for this issue, the primary one is that there’s something wrong with the brushes and wheels.
Robot vacuums require a lot of maintenance, such as you must clean the robot at least every twice cleaning run.
Due to the accumulation of dust, debris, and hair in the brushes, rollers, wheels, and bin, you could face issues with your robot vacuum.
Therefore, ensure to clean the brushes, wheels, and bin thoroughly after every twice cleaning run.
If the vacuum isn’t picking up debris, the vacuum’s bin must be full. You need to empty out the bin and then retry with cleaning.
You must clean the side brushes, main brush, wheels, and sensors, using a damp microfibre cloth.

Turn On the iLife Vacuum Power Switch

When the iLife robot vacuum beeping while charging means the power switch isn’t ON.
While the Robot vacuum is charging, it needs to be ON.
You cannot charge the vacuum when the power switch is OFF.
Otherwise, it will keep beeping until you turn OFF the robot vacuum.

Clean the Brushes

If the brushes of the iLife robot vacuum aren’t spinning properly, must be due to debris and hair stuck in the wheels.
The roller of the vacuum could also be stuck due to debris buildup.
You can take out the roller and the brushes to clean them thoroughly.
Ensure to clean them properly and remove any type of accumulation.
After this, the robot vacuum should work just fine.

Resolving the iLife Error Codes

When the iLife vacuum starts showing error codes, means the iLife robot vacuum troubleshooting is in order.
Each error code indicates something, such as the E11 error code indicates wheel malfunction.
In this case, you need to check out the left wheel, clean it, and remove any stuck debris and hair from it.
The E12 error code means there’s an issue with the right wheel, you need to inspect the wheel and clean it accordingly.
Whereas, the E13 error code signifies an issue with the left side brush, inspect the brush and clean it appropriately.

Troubleshooting iLife Vacuum Overheating

When the robot vacuum is overheating, it definitely requires some iLife vacuum troubleshooting.
The vacuum usually overheats when the vacuum is working for too long, you need to turn it OFF for some time.
Leave the vacuum OFF for sometimes and after a while, you can turn it back ON.
The robot vacuum also overheats, when a part is jammed or stuck in a place.
In this case, you need to check what part is jammed or stuck and troubleshoot it accordingly.

Lubricate the Motor

If the side brushes of the vacuum are not rotating, there could be an issue with the motor.
When you have had your vacuum for too long, the motors could weaken with time and overuse.
Therefore, you can either replace the motors or just buy a new iLife robot vacuum.
You can also try lubricating the motor, wheels, and brushes with some lubricating oil.

Reset the Vacuum

If you are facing this issue, or nothing else is working, you can reset the vacuum.
The reset will eliminate all the internal issues with the robot vacuum.
To reset the iLife vacuum, you need to press and hold the clean button on the vacuum.
After 3 seconds, you can release the button, and you will hear a beep.
When the reset is complete, the vacuum will reboot.
At last, you can reconfigure the vacuum as the default settings are back.

These are some iLife robot vacuum troubleshooting methods you can try to fix the iLife won’t run issue. If you’re worried about the iLife vacuum flashing blue light, it’s nothing to worry about. The blue light flashing means the vacuum’s charging is full and you can start using it.

FAQs

Why is my Robot Vacuum Not Working?

The robot vacuum not working could be because of an issue with the battery. If you have had the vacuum for quite some now, can cause issues with the battery. You can try replacing the battery or buying a new robot vacuum.

Why does my Robot Vacuum keep Stopping and Beeping?

The iLife vacuum is a smart device, so whenever there’s an issue with it, it beeps to warn you. Therefore, whenever it beeps you need to pay attention to the robot vacuum. If the vacuum is stopping and beeping, indicates the vacuum is stuck on something, or the wheels/brushes are jammed. After figuring out the issue, you can troubleshoot it effectively.

Why is My iLife Robot Vacuum Creating too Much Noise?

When the vacuum creates too much annoying noise, means there’s some kind of blockage in the robot. You can take out the brushes, wheels, and roller and inspect them. After that, you must clean the parts thoroughly.

Final Words

We hope these iLife vacuum troubleshooting methods are effective. If there are any other issues you are having or anything else you require guidance with, you can get in touch with our team.