How To Connect Shark Robot To WiFi?
The Shark robot is one of the top-quality robot vacuums with an impeccable navigation system. This vacuum integrates several features, such as better room mapping and smart pathing, compared to other robot vacuums. You just need to set it up and connect it to Wi-Fi and you’re good to go. Without a WiFi connection, you cannot make the most out of your Shark robot vacuum. Therefore, you must know how to connect Shark robot to Wi-Fi, as without WiFi the robot doesn’t clean.
If you want to know how to connect Shark Ion robot to Wi-Fi, we’ve got you. We have brought you this ultimate guide to help you connect Shark robot to Wi-Fi. This post will cover the complete procedure to connect the robot to the WiFi for both Android and iOS.-
How to Connect Shark ION Robot to WiFi? (Android)
To connect Shark robot to Wi-Fi, you just need the Shark app. Through the app, you can set up your Shark robot vacuum accurately. You can follow the steps below to connect your Shark robot to the WiFi:
- Firstly, install the Shark app on your smartphone from Play Store.
- Ensure the Shark robot vacuum is fully charged.
- From the app, create an account using your email and then set a password.
- Now, press the ‘Dock’ and ‘Clean’ buttons at the same and hold them.
- When the WiFi indicator light starts blinking, you can release the button.
- Hereon, select your WiFi network from the list and enter the password.
- Remember, the Shark vacuum can only work with the 2.4GHz network.
- Finally, when the connection is successful, you will see the ‘Success’ screen.
We hope you were able to understand how to connect Shark robot to Wi-Fi. If you have an iPhone, keep reading ahead.
How to Connect Shark Robot to WiFi? (IOS)
You can connect your Shark robot vacuum to the Wi-Fi through your iPhone with the Shark app only. The Shark app is available on App Store as well. Follow the steps below to connect the robot to the WiFi:
- To begin with, download the Shark app on your iPhone.
- You must charge the robot before you connect it to the WiFi.
- Now, open the app and create an account using your email, and set a password.
- After logging in, press and hold the ‘Dock’ and ‘Clean’ buttons on the vacuum.
- You can release the buttons when the WiFi indicators light up.
- Hereon, open the settings of your iPhone and go to the WiFi section.
- Now, select your robot’s name from the drop-down section.
- After that, return to the app and select your WiFi network from the app.
- Ensure to enter the correct password to form a connection successfully.
- Keep in mind to connect to the 2.4GHz band only.
- At last, when a connection is made the app will display the ‘Success’ screen.
These are the steps to connect Shark robot to Wi-Fi. Follow these steps carefully to connect the vacuum to the WiFi.
Final Words
We discussed how to connect Shark robot to WiFi in this blog. If there’s anything else you require assistance with, you can get in touch with our team.
FAQs
Why won’t my Shark robot connect to Wi-Fi?
If the Shark robot vacuum keeps disconnecting from your Wi-Fi, means the WiFi signal is very weak. You need to fix the issues with your WiFi network. To fix any issues with your router, you can power cycle it, update the firmware, and reset it. These methods eliminate all the technical issues within the Shark robot vacuum. To receive a high-speed internet connection, ensure no objects that could interfere with the router’s network are around it.
How to Reboot the Shark robot vacuum?
To reboot the Shark robot vacuum, you just need to turn the ON switch to OFF for some time. After a few seconds, you can turn the robot vacuum back ON. Now, almost all the issues with the robot vacuum should be gone.
Can I use the Shark Ion robot without the app?
The latest Shark ION 720 model comes with a remote control, which means you don’t need an app to control the robot. Whereas for other models, you need the Shark Clean app to manage the robot vacuums. Through the app only, you can manage the device and set it up accurately. Therefore, it’s impossible to use the Shark robots without the app that comes without a remote control.
Why isn’t my Shark Robot Vacuum Working?
A possible reason for the Shark robot vacuum not working could be that you didn’t connect it to the WiFi or you connected it to the 5 GHz band. Without a WiFi connection, the Shark robot vacuum cannot work effectively. Moreover, the Shark robot vacuum can’t work with the 5 GHz band as well. Therefore, you must connect it to a 2.4 GHz stable WiFi connection.
