The Ultimate Guide for Galaway Wi-Fi Extender Setup

Extend your current router’s network coverage with the help of the Galaway WiFi extender. This extender is among the top networking devices. You can eliminate most of the dead zones in your house using this extender. That’s why you must execute the Galaway Wi-Fi extender setup correctly. You can only make the most of your extender by setting it up. You must log in to the user interface to set up the extender . Thereupon, you can configure the settings accordingly.

The setup process can seem confusing, but you can execute it using the correct Galaway WiFi extender setup instructions. Thus, we have brought you the ultimate post to help you set up the extender accurately. This blog will contain the complete procedure for the setup.

Necessities for the Galaway AC1200 WiFi Extender

Before we discuss the Galaway WiFi extender setup instructions, you must know the requirements. You require the following information for the setup:

These are some things you must have to set up the extender properly.

Methods For the Galaway WiFi Extender Setup

There are two methods you can use for the Galaway AC1200 WiFi extender setup. You can either set it up through the web browser or the WPS button. To set it up using the web browser, you require the default IP address, username, and password to log in. Whereas, for the WPS method you can set it up in a few minutes with the WPS button. The methods are as follows:

Galway WiFi Extender Setup Through the Web Browser

Primarily, power on the extender and the router and place them in the same room.
Now, connect your PC or smartphone to the extender’s network.
You can connect your PC to the extender using an Ethernet cable.
Hereon, open a web browser and enter the default IP address in the address bar.
When the login page appears, enter the default username and password to log in.
Once the user interface appears, the extender will scan for all the available networks.
After that, you must select your WiFi SSID and enter the correct password.
Give the extender some time to form a connection with the router.
When the connection is successful, you must configure the settings appropriately.
Ensure to set up a complex SSID name and password to avoid hacking.
Also, set up strong credentials as well to keep away intruders.
Finally, ensure to save the changes made by you and reboot the extender.
Now you can relocate the extender and connect your devices to the extender.

Galaway WiFi Extender Setup Instructions Via the WPS Button

To begin with, place the extender and the router in the same room.
Ensure to power them on by plugging them into a stable power source.
Now, locate the WPS button on your router and the extender.
You can find the WPS button on the router’s side panel.
Hereon, press the WPS button on the router and hold it for 2-3 seconds.
Within 2 minutes, press the WPS button on the extender.
Press the button till the WPS light on the extender starts blinking.
When the WPS LED stabilizes on the extender indicates the connection is successful.
At last, you can relocate the extender.

These are the Galaway WiFi extender setup instructions. The WPS is the easiest and fastest method to set up the extender. However, if your router doesn’t support this feature, you must set it up using the former method.

Troubleshooting the Galaway WiFi Extender Setup Issues

If you are having trouble performing the Galaywa WiFi extender setup instructions correctly, you must fix it. You can try the following methods to resolve the setup problems:

Power On the Extender

The extender should have a proper power source to work effectively.
Without a power source, you cannot set up the extender correctly.
Therefore ensure to plug the extender into a working outlet.
Check the current power source of the extender.
If it’s not working, you must plug the extender into another outlet.

Connect your Device to the Extender

Your PC or smartphone should have a proper connection with the extender.
Otherwise, you cannot access the login page of the extender.
You can connect your smartphone to the extender from the settings.
Whereas, you can connect your PC to the extender using an Ethernet cable.
Ensure the connection is proper to access the login page successfully.

Fix the Web Browser

There could be issues with the browser as well, which you must fix.
Before you access the login page, erase the browser cache and clear the cookies.
Also, disable the firewall or ad-blocker from the web browser before logging in.
After this, you can try again with the Galaway WiFi extender setup.
If you are still facing an issue, you can use another web browser for the setup.
Just ensure to use an up-to-date browser only for the setup.

Shift the Router and the Extender Closer

If the extender and router are not forming a connection, move them closer.
They could have trouble establishing a connection when they are too far.
Therefore, you must place the extender next to the router during the setup.
Now, the Galaway extender setup should be successful.

Use the Correct Web Address

If you are having trouble accessing the login page, check the web address you are using.
You cannot access the login page using the wrong IP address.
To find the correct IP address of the extender, connect your PC to the extender.
Now, go to start and enter ‘cmd’ in the search box.
Hereon, type ‘ipconfig’ on the screen and press enter.
You can find the IP address, next to the Default Gateway.
Now, you can access the login page, using this IP address

Final Words

After the setup, ensure to place the extender halfway between the router and the dead zone. If you place it too far from the router, the connection will break. Thus, ensure to pick the most suitable place for the extender. If there’s anything else you require help with or any issue you are having with your extender, you can reach out to our team right now for an effective solution.

FAQs

What is the IP address of my Wi-Fi extender?

You can find the IP address on your extender only. However, if you are unable to locate it, there’s another way you can find the IP address. First, connect your extender to your PC, go to start, and type ‘cmd’ in the search box. When the command prompt appears, enter ‘ipconfig’ and press enter. You can find the default IP address next to the default gateway.

Why is my Wi-Fi extender not connecting to my Wi-Fi?

If you are having trouble connecting your extender to the router, check the distance. When the extender is too far from the router, it can have difficulty forming a connection. Ensure to place the extender inside the router’s range. Ensure your router is working fine to ensure a proper connection.

How to reboot the Galaway WiFi extender?

To reboot the extender, you just need to power off and unplug the extender for some time. After a minute or so, you can power the extender back on. Rebooting the extender fixes any minor issues with the extender. You can reboot the range extender every week to fix any issues.

How to fix the Galaway extender not working issue?

You can fix the issues with the extender by resetting it. The reset will fix all glitches and bugs with the extender. The steps for the reset are as follows: