Eufy Robovac Red Light Issue: Causes and Fix

The Eufy robovac is an excellent robot vacuum to keep the floors clean. This robot vacuum works well on pretty much every hard and soft surface. Ensure to set them up correctly to maximize their functionality. You just need to charge them frequently to ensure proper working. Moreover, a smart feature of this robot vacuum is that it has LED lights that convey the status of the robot vacuum. Therefore, you must know what each light and its behavior means. Such as Eufy robovac red light is an issue that several users experience.

If you are facing the Eufy robovac solid red light issue, you must know what it means. But you don’t have to worry, as we have made this post to help users with it. This blog will consist of the reasons behind the Eufy robovac 11s red light. Afterward, we’ll discuss the methods you can use to fix the issues with it.

Reasons for Eufy Robovac Red Light Issue

The Eufy robovac solid red light basically indicates there’s an issue with the robot vacuum. The causes for this light are as follows:

These are some common factors responsible for the Eufy robovac not charging red light issue. Further, we’ll go over the methods you can use to resolve such issues.

How to Fix Eufy Robovac Red Light Issue ?

Now that we know the causes responsible for the Eufy robovac red light 10 beeps, we can fix it effectively. You can try the following methods to resolve the Eufy robovac red light issue:

Inspect the Battery

The Eufy robovac not charging red light issues when the vacuum’s battery is low.
Most of the time, when the vacuum’s battery is too low, it goes to the dock itself.
However, sometimes the Eufy isn’t able to make its way back to the charging dock.
In this case, you must place the robovac on the vacuum manually.
Charging the vacuum will fix the Eufy robovac red light issue.
If you’ve had the vacuum for too long, consider replacing it.

Connect to the Wi-Fi

The Eufy robovac requires a stable WiFi connection to function effectively.
Without a stable WiFi connection, the robovac will not work at all.
Therefore, ensure to connect the vacuum to the WiFi correctly.
If you are having trouble, check your networking device.
There could be an issue with your router causing the vacuum to not connect to the WiFi.
You can also try rebooting, updating the firmware, and resetting the router to fix it.

Clean the Sensors

The sensors of the vacuum play an important role in the working of the vacuum.
If the sensors on the vacuum are dirty, the vacuum will have trouble functioning.
Therefore, ensure to clean the vacuum sensors once every two weeks.
You can use a microfibre cloth to clean the vacuum sensors.
This should fix the Eufy robovac solid red light problem.

Replace the Power Adapter

The Eufy robovac solid red light issue also occurs when it has trouble charging.
If the vacuum is unable to charge fully, there could be an issue with the power adapter.
A defective adapter can cause the robovac to not charge completely.
Thus, in this case, you must replace the power adapter.

Verify the Brushes

The Eufy robovac 11 red light issue can occur due to dirty brushes as well.
If the brushes of the vacuum are dirty, it could have trouble cleaning around effectively.
Therefore, ensure to clean the brushes of the vacuum frequently as well.
You can use a wet microfibre cloth as well to clean the brushes on the vacuum.
Ensure to remove any debris and hair from the brushes for proper working.
To fix the Eufy robovac not charging red light issue, clean the wheels of the vacuum.

Reset the Eufy Robovac

If none of these methods are working, you must reset the vacuum.
Resetting the vacuum will fix all issues with the vacuum.
To begin with, look for the ‘Start’ and ‘Recharge’ buttons.
Now, press these buttons simultaneously and hold them.
After 5 seconds, you can release the button.
This should fix the Eufy robovac not charging red light issue.

These are some methods to fix the Eufy robovac red light issue. Now, the red light should be gone and the vacuum should be working correctly. If there’s any other trouble you are having with your vacuum, you can reach out to our team right now.

FAQs

What should I do if the basic troubleshooting steps don't work?

If the troubleshooting methods aren’t working, you can reset the vacuum. Resetting the vacuum will fix all the internal issues. If the reset doesn’t work, you can contact our team. We have a team full of experts, who can help you resolve this issue effectively.

Can I replace the Robovac battery myself?

Yes, you can replace the battery of the vacuum yourself. You just require one tool and then you can replace the battery easily. All you need to do is unscrew the back panel, take out the battery, and insert the new battery easily.

How often should I update the firmware?

The Eufy Robovacs update the firmware automatically. So you don’t have to worry about updating the firmware. However, if you want to upgrade the firmware, you can do it yourself as well from the app.

How can I prevent the Robovac from getting stuck under furniture?

You can either use furniture risers or set the furnitures under no-go zones. This will prevent the vacuum from getting stuck under the furniture. The furniture risers are helpful in elevating the furniture, making it easy for the vacuum to pass.