How to Setup Engenius WiFi Extender?
You eliminate all dead zones in your house with the help of the Engenius extender. The Enegnius extender offers a top-quality internet connection with an impeccable network coverage. This extender is perfect if you live in a vast place and constantly face weak signal strength. You just need to know the complete procedure for the Engenius WiFi extender setup. With comprehensive knowledge, you can set up the extender correctly and say goodbye to the dead zones. Thus, you must know the complete process for the setup.
If you require assistance with the Engenius WiFi extender setup, we’ve got you. We are here with this post to help users set up their extenders correctly. This blog will consist of the thorough instructions for the setup. So you can come back to this guide when setting up the extender. Let’s begin.
Requirements For the Engenius WiFi Extender Setup
To set up the extender, there are some things you must have. You can set up the extender correctly when you have all the necessary things. You require the following items for the setup:
- A setup router
- The default IP address
- An Ethernet cable
- The default login details
- Your smartphone or PC
These are the requirements you must have to set up the extender accurately. Further, we will cover the procedure for the setup.
Steps For the Engenius WiFi Extender Setup
There are two methods you can use to set up the extender. You can either set it up through the web interface or using the WPS button. For the former method, you require the default IP address and login credentials to log into the web interface. Through the user interface, you can set it up accurately. For the other method, you must ensure your router also supports the WPS button. Then, you can set it up within a few minutes. The steps for the setup are as follows:
Engenius WiFi Extender Setup Through Web Interface
- To begin with, place the extender and the router in the same room and power them on.
- Now, connect your smartphone or PC to the extender’s network for the setup.
- You will require an Ethernet cable to connect your PC to the extender.
- On that device, open a web browser and enter the default IP address in the address bar.
- When the login page appears, enter the default credentials in the given fields.
- Hereon, the web interface of the extender will display, and you can begin with the setup.
- From the web interface, select Site Survey to search for all the available networks.
- After that, you need to select your WiFi network from the list and enter the password.
- Give the extender some time to form a connection with the extender successfully.
- Once a connection is made, you can configure the settings of the extender accordingly.
- Ensure to set up a strong WiFi password for both bands to prevent hacking.
- At last, save the changes, relocate the extender, and connect your devices to the device.
Setup Engenius WiFi Extender Via the WPS Button
- Firstly, keep the extender and the router in the same room and power them on.
- Now, you need to log into the web interface and select the WPS button method.
- Hereon, locate the WPS button on the router, press it, and hold it for 2 seconds.
- Within 2 minutes, press the WPS button on the extender to activate the WPS feature.
- The orange LED will blink on the extender indicating the extender is trying to connect.
- After that, give the extender time to form a connection until the orang light stabilises. extender.
- The solid orange light on the extender means the connection is made.
- In the end, relocate the extender and connect your devices to the extender.
These are the steps for the Engenius WiFi extender setup. Once the setup is complete, you can place the extender near the dead zones to eliminate them. However, ensure to set the extender inside the router’s range to ensure a seamless connection. We hope you understood the thorough process for the setup. If there are any issues you are having with your Engenius extender, you can reach out to our team right now.
FAQs
How to Connect the Engenius Extender to the devices?
To connect the extender to your smartphone, you need to go to the settings. Now, go to the WiFi settings, and search for the extender’s network. Select the network and enter the password you set up in the web interface. To connect your PC to the extender, you require an Ethernet cable. Once a connection is made, you can enjoy a high-speed internet connection all over the house.
How to Find the IP address of the Engenius extender?
To find the IP address of the extender, you need to connect your PC to the extender. Now, open the PC, go to start, and type cmd in the search box. The command prompt will appear on the screen, and type ipconfig and press enter. Now, you can find the default IP address next to the default gateway. You can use the IP address to access the login page of the extender.
Why is My Extender Not Working Properly?
If your WiFi extender isn’t functioning correctly, check the setup. When the extender doesn’t have a proper connection with the router, it will not work at all. Thus, ensure to connect the devices correctly and place them close by for a seamless connection.
