Shark Vacuum Brush Not Spinning?

Did you just see the Shark vacuum brush roll not spinning? Well, it is the most common issues that users face in their day-to-day lives. If you observe your Shark brush roll not working, it indicates that there are some active technical issues on your robot vacuum. Although Shark robot vacuums are some of the most reliable vacuums on the market, the Shark vacuum brush not spinning issue can be annoying.

If you are worried about the Shark brush roll not working issue, we suggest that you stay calm. The Shark rotator brush not spinning issue can be only fixed after identifying the root cause of the problem. Once you detect the root cause or reason of Shark vacuum brushes not spinning, you will be able to better troubleshoot the issues.

In this post, we will explain to you how you can identify the root cause of the Shark rocket brush not spinning. After that, we will walk you through the tips and tricks to fix this issue without having to call a professional technician.

Let’s start with the Shark robot vacuum troubleshooting guide.

Common Causes for Shark Vacuum Brush Not Spinning

As already discussed, we will first help you identify the main causes of the Shark vacuum brush not spinning. We have put down some of the points that you can refer to in order to know about the potential reason behind the issue:

Vacuum belt is broken / not working
Vacuum is not connected
Dust stuck in roller
Due to dirty filters
Faulty motor
Damaged brush roller
Brushes is full of dust
Using incorrect floor type settings
Dust box is full

How to Fix Shark Vacuum Brush Not Spinning?

Now that you know about the potential reasons of roller brush on Shark vacuum not spinning, you can go about the troubleshooting process. These steps will help you fix the Shark brush roll not spinning issue without any hassle:

1. Remove lodged debris

First of all, make sure you remove all the dust and debris accumulated inside or around the brush roll.
You can use a small brush to clear out all the dust and dirt from the brush roll.
Dust and debris can also cause obstruction on your device.

2. Change the belt

You need to cross-check whether the brush roll belt is damaged or not.
If the belt is not in good condition, kindly replace it with a new one.
You can contact the supplier or manufacturer to get a new belt.

3. Check Blockage in Vacuum

You may wonder why my Shark vacuum brush not spinning if there is any blockage in the vacuum.
You can open the components of your device to clear out the blockage from the vacuum.
If you still observe the Shark rocket brush not spinning, go to the next step.

4. Turn On Roller Brush Switch

Make sure you check whether the brush roll switch is turned Off.
If the switch is turned Off, kindly turn it On.
After that, you must check whether the brush roll is working or not.
If you notice the Shark vacuum brush roll not spinning, kindly go to the next step.

5. Clean the Brush

It is also one of the most important steps of the troubleshooting process.
Make sure you clean the brush of the Shark robot vacuum properly.
Kindly check if the roller brush on Shark vacuum not spinning even now.
Go to the next step.

6. Change the floor Type Settings

Sometimes, the wrong floor type setting on your device also causes problems.
As a result, you may wonder why Shark brush roll not working.
Kindly set up the suitable floor type configuration on your Shark robot vacuum.

7. Clean the filters

At last, make sure you clean the filters of your device.
You can use a suitable thing to clean out the filters of your robot vacuum.

Finally, the Shark vacuum brush not spinning issue will be resolved. Your robot will start working as usual.

FAQs

How do you reset the brush on a shark vacuum?

Here are the steps to reset the brush on your Shark robot vacuum without any hassle:

Unplug the vacuum from the power source.
Locate the brush roll cover on the vacuum head.
Use a screwdriver to remove the screws that secure the brush roll cover in place.
Lift off the brush roll cover to access the brush roll.
Check the brush roll for any debris or tangled hair that may be obstructing its movement.
Use scissors or a knife to cut away any hair or fibers that are wrapped around the brush roll.
Once the brush roll is free of any obstructions, push the reset button located on the side of the brush roll housing.
Replace the brush roll cover and secure it with the screws.
Plug in the vacuum and turn it on to test the brush roll.

Why is my Shark duo clean vacuum brush not turning?

If you see your Shark duo clean vacuum brush not turning, make sure any debris or tangled hair are not obstructing the movement of your device. You may use scissors or a knife to cut away any fibers or hair wrapped around the brush roll.

How long is Shark warranty?

Shark robot vacuums come with a standard 5-year warranty period. In order to verify, make sure you either refer to the product manual or go to the official website of Shark.

Why is my vacuum brush head not spinning?

If you observe your Shark robot vacuum’s brush head not spinning, make sure you look for the possible issues on your device. Examine the brush head of your Shark robot vacuum and try identifying the possible problems.

Conclusion

This page was all about the Shark vacuum brush not spinning issue. We discussed the main causes of the Shark vacuum brush roll not spinning problem. We hope this page was helpful to you and that it helped you resolve the issue without any fuss.

If you still come across any issues or queries, kindly feel free to reach out to us for more help/