Joowin WiFi Extender Setup : Via Web Interface & App
Annoyed of dead zones in your house? Install the Joowin WiFi extender in your house and get rid of all the no-WiFi areas by setting up the extender. You just need to proceed with the Joowin extender setup to make the most of the extender. The Joowin extender is among the top extender devies. This extender has impeccable network coverage and a high-speed internet connection. To start using this extender, you need to set up the extender properly. For the setup, you just need to log into the web interface.
You can set up the extender with the help of the correct Joowin WiFi extender setup instructions. That’s why we are here with this blog to help users understand the complete procedure for the setup. This blog will guide you through the thorough process for the setup. We will also discuss the issues you could face with the setup along with the troubleshooting methods.
Necessities for the Joowin Extender Setup
To set up the extender, there are some things you must have. With the all the necessary things, you can set up the extender correctly. You require the following things for the setup:
- The default IP address
- An Ethernet cable
- The default login credentials
- An active internet connection
- Your smartphone or PC
These are the requirements for the Joowin WiFi extender setup. Further, we will go over the steps for the setup.
Joowin WiFi Extender Setup : Methods
There are two methods for the setup. You can either set it up via the web brower or through the Joowin app. For the former method, you require the default IP address, username, and password of the router. Otherwise, you can just install the Joowin app and set up the extender properly. The steps for the setup are as follows:
Joowin WiFi Extender Setup Via Web Browser
- Firstly, connect your smartphone or PC to the extender’s network.
- You can use an Ethernet cable to connect your PC to the router.
- Now, open a web browser and enter the IP address in the address bar.
- When the login page appears, enter the default login credentials in the address bar.
- Hereon, the web interface of the extender will appear on the screen.
- The extender will search for all the available networks around the extender.
- After that, you need to select your WiFi network and enter the correct password.
- Give the extender some time to form a connection with the router successfully.
- You can customize the extender’s settings properly through the web interface.
- Finally, when you are done with the setup relocate the extender near the dead zones.
Joowin Extender Setup Via App
- To begin with, install the Joowin app on your smartphone.
- The app is available on both Play Store and App Store.
- Now, open the app and log into by creating your account.
- Hereon, the app will scan for all the nearby networks.
- You need to select your WiFi network from the list.
- After that, enter the correct WiFi password to firm a connection.
- Once a connection is made, you can configure the settings accurately.
- At last, once the setup is complete, you can move the extender somewhere else.
Troubleshooting the Joowin Extender Setup Issues
If you are having trouble logging into the extender and setting up the extender, you must fix it. You must fix the issues, as you can’t set up the extender without logging in. To fix the issues, there are various methods you can use. You can try the following methods to resolve the issues:
Connect to the Extender
- To log into the extender, you must connect to the extender.
- Without a connection with the extender, you cannot log in.
- Thus, ensure to connect your device to the extender’s network.
- You can connect your smartphone to the extender through the WiFi settings.
- To connect your PC to the extender, you must have an Ethernet cable.
Use the Correct IP Address
- You will also have trouble logging in, if you use the incorrect IP address.
- While using the wrong IP address, you cannot access the login page.
- Thus, ensure to use the correct IP address only for the login.
- You can find the correct IP address on the back of the router.
Fix the Web Browser Issues
- Sometimes, the web browser issues alos causes login issues.
- Before the Joowin extender setup, erase the browser cache and cookies.
- Also, check if the web browser has a firewall or ad-blocker enabled.
- If there is, you must disable it, as it causes issues with the login.
- Check if the web browser requires an update, as an outdated will not let you login.
- If the issue persists, you must use another web browser for the setup.
These are some methods you can use to fix the Joowin extender setup issues. Now, you should be able to log in and set up the extender correctly. We hoep you understood the complete Joowin WiFi extender setup instructions. You can come back to this guide to set up the extender. If there are any issues you are facing, you can contact our team.
FAQs
How to Find the Correct IP Address of the Extender?
To find the default IP address of the extender, you must connect your PC to the extender. Now, go to start and type Cmd in the search box to access the command prompt. On the CP, type Ipconfig and press enter. You can find the correct IP addres next to the default gateway. The correct IP address is also written on the product label.
Why is My Joowin Extender Not Working?
The Joowin extender can stop working, when the connection between the extender and the router breaks. Without a connection with the extender, it will not function at all. Thus, ensure to set up the extender and form a connection correctly. You can also try power cycling or resetting the extender to fix any glitches and bugs within the extender.
How Many Modes does the Joowin Extender offers?
The Joowin extender has three modes. It has the router, extender, and access point mode. To enable any of these modes, you need to log into the web interface. After logging into the extender’s web interface, you can enable any mode. Then, you need to configure the settings accordingly.
